Shoutpedia Sun, 13 Sep 2015 10:47:57 +0000 en-US hourly 1 TaiG iOS 8.4 Jailbreak for Mac OS X Users Released, Download it! Sun, 02 Aug 2015 10:08:21 +0000 You can now download the Mac OS X version of TaiG to jailbreak iOS 8.4 on the supported devices. All the devices, that are iPhone 6 Plus, iPhone 6, iPhone 5S, 5, 5C, iPhone 4S, iPad and iPod Touch, running on iOS 8.1.3 to iOS 8.4 are compatible.


Download TaiG for Mac to Jailbreak iOS 8.4:

If you have already jailbroken your device using either TaiG’s windows version or PP Jailbreak Mac Version, you don’t need to re-jailbreak your device. There is nothing new in this very initial version. The Cydia is also same as it was in Windows version.

However, if your device is still intact and running on stock iOS 8.4 version, you can download TaiG for Mac OS X version.

The whole jailbreak process “How to Use TaiG on Mac for iOS 8.4 Jailbreak” is similar to the one we have already mentioned in our previous Windows-based version. The main point you should take care of is that your device should not be upgraded to iOS 8.4 version using the iPhone/ iPad built-in OTA updater. Though you may get the final success message if your device is updated by such way, but the chances of failure are very high. It is better recommended to back up your device first using either iTunes or iCloud, then install the fresh iOS 8.4 iPSW file and then apply Mac Version of TaiG.

Screenshot of Windows Version

You can download this Mac version of TaiG jailbreak from our download page. This jailbreak is released free of cost. If you see any paid version on any website, please let us know by leaving a comment below.

]]> 0 taig-mac-osx-8.4 taiG Screenshot of Windows Version
Unjailbreak and Remove Cydia Without Upgrading or Restoring Fresh iOS on Your Device with Cydia Impactor Sun, 19 Jul 2015 06:50:08 +0000 Do you want to unjailbreak your iOS device, remove Cydia and get back the clean, stock iOS firmware without upgrading to the latest version or restoring the fresh iPSW file? Here comes a new application, called Cydia Impactor, for your iPhone, iPad and iPod Touch that lets you delete and remove everything on your device including Cydia, picture, contacts, bookmarks, history.

Cydia Impactor is released by Saurik, a very well known personality in the jailbreak community and developer of Cydia store. Please continue reading to know how to get it and use it for your iPhone.


How Much Cydia Impactor is Important?

If you love jailbreaking your device, you are going to like this tool as well. It is going to be very handy in those strange situations where you can’t do anything except to lose the jailbreak feature on your device. For example you want to give your iPhone, iPod or iPad to your friend, relative or even want to sell it, and you want to delete everything on it but still want to keep your device still jailbreak-able. Or, if your device is not responding properly and giving some weird hangs and crashes and you want to remove every third-party app and tweak, run Cydia Impactor.

As you know, whenever you upgrade your device or restore it to clean iOS, you have only one option, and that is you have to install the latest firmware only. You can’t install any specific iPSW file. The reason of this limitation is Apple signs every iOS on your device before it is activated and becomes fully functional. And this signing window is kept open for only the latest iOS version. So, in case your device is running on iOS 8.3 and you want to get the clean firmware on it, you don’t have any choice except to install the latest iOS 8.4. Similarly, when iOS 9 is out, you won’t be able to install the previous version. Cydia Impactor lets you delete all the data on your device and make your device as clean as it is just restored. After running it, you have to reactivate your device, run the Set Up on your device and voila.

How to Unjailbreak Your iPhone with Cydia Impactor?

This app is available in the Cydia store and works just like any other tweak or application you download. Its desktop version is also available for Windows, Mac, and Linux users, but the mobile version is sufficient to perform the required functions. Before you start un-jailbreaking your device, please read the follow:

  1. Your device should be fully charged or at least above 75%.
  2. Cydia Impactor takes a lot of time to clean your iPhone. You will also see a lot of texts for several minutes. But don’t worry and let it complete the process.
  3. Alway, alway back up your device first either via iTunes or iCloud. You’ll lose everything on your iPhone after running it.
  4. You’ll have to reactivate your Phone after running it.
  5. The iCloud password is also required after the clean-up process. So, if you don’t know iCloud password, never run this tool otherwise you won’t be able to use your iPhone.
  6. Don’t touch it while running this app.

Step 1: Fire up Cydia and refresh the Changes.

Step 2: Now search for Cydia Impactor in the store and install it.

Step 3: After successful installation, you’ll see a new icon on the homescreen of your iPad, iPhone. Tap it to launch it.

Step 4: Now tap on “delete all data and unjailbreak” option. Reconfirm by tapping on ‘Delete All’.


Step 5: Sit back, relax and let the app perform its function. You will have to wait for several minutes depending on the data installed on your device.

Step 6: When the process is complete, go through the initial iOS set up process.

Now you have successfully restored your device to clean iOS without upgrading. You can use the compatible jailbreak anytime to re-jailbreak your device.

]]> 0 unjailbreak-iphone-impactor cydia-impactor
PP iOS 8.4 Jailbreak for Mac – Download and How to Instructions Tue, 14 Jul 2015 00:04:56 +0000 The wait for iOS 8.4 Mac OS X jailbreak is finally over. After releasing the Windows version of iOS 8.4 PP jailbreak, 25PP team has finally released the first Mac version which runs smoothly on your PC without needing any workarounds or installing any virtual machine. This version is packed in dmg file format. Now all you have to do is to download it from the download link provided at the bottom of this post and then run it after connecting your device. However, there is one important step you should take care of before applying it on your iPhone 6, iPhone 6 Plus, iPhone 5S / 5C / 5, iPhone 4S and various models of iPad. Continue reading after the fold what is important and what is not.



The first and the most important thing is that your device must not be updated via the built-in updater. If you upgraded your device to iOS 8.4 using any OTA update, you’ll have to restore the fresh iOS 8.4 iPSW file using iTunes on your device so that you don’t get any failure error during the jailbreak process. Other than this one, there are few more requirements which are summarized below:

  1. Make it sure you have installed the latest version of iTunes on your Mac OS X computer.
  2. Don’t open iTunes or any XCode app while the jailbreak is in progress.
  3. Turn off Bluetooth and remove Apple Watch if it is paired with iPhone.
  4. The device should be charged at least 75% or above.
  5. Download iOS 8.4 and restore it to your device freshly if any iOS update is installed via OTA in past.

Step 1: Before starting the jailbreak procedure, back up your device using iTunes or iCloud. This step is very important in order to save all your precious data.

Step 2: Now download PP jailbreak Mac OS X version for iOS 8.4 on a convenient place like desktop.

Step 3: On your device, turn off Passcode, TouchID and Find My iPhone.

Step 4: Now launch PP jailbreak and connect your device with Mac machine.


Step 5: Uncheck Install PP helper.

Step 6: Now click on “Jailbreak” button. You’ll be presented with a ReadMe First checklist. Make it sure you are following the checklist and then press Continue.

Step 7: Sit back and let PP iOS 8.4 jailbreak on Mac do its job. When the process is finished, you may disconnect your device from PC. Go through the usual first time Set Up procedure and then launch Cydia to install the updates.

Some users are reporting that they are getting “error in preparing environment” message during the jailbreak. If you are also getting this error, update your iTunes and then restart PP jailbreak iOS 8.4 mac version.

Download Latest Version of PP Jailbreak for iOS 8.4 on Mac:

Here is the direct download link for PP iOS 8.4 Mac jailbreak. If you are getting very low download speed on the official download link, you may try this fast mirror link. In case you landed on this page while searching the Windows version, you can get it too.

]]> 2 iOS_8.4_jailbreak_mac PP_jailbreak_mac_iOS_8_4
Stuck At 60% Using TaiG Jailbreak? Download TaiG 2.4.1 to Resolve Fri, 10 Jul 2015 17:57:39 +0000 Here is a new version of TaiG 2.4.1 which is meant to fix the issue of getting stuck at 60% while jailbreaking the device with the previous version. Along with this major change, there are few other improvements and stability enhancements in the new version. This version is still under testing environment, but soon its stable version would be promulgated.

If you want to jailbreak your device using TaiG but are not sure which version to try, we have gathered below few pieces of information in the form of questions and answers to help you select the best version for your device.

download latest taiG

Q: My device is already jailbroken using the previous version of TaiG, should I use this new one?

A: If your device is already jailbroken, you don’t need to re-jailbreak your device with TaiG 2.4.1 version. Indeed, you should install all the updates issued by TaiG team on Cydia store.

Q: I am still running iOS other than that of iOS 8.4 and now want to update my device to iOS 8.4. Which version of TaiG should I use in this case?

A: If you want to upgrade your device to iOS 8.4 and then jailbreak it, you should use TaiG 2.4.1. You can also use the previous version 2.3.1.

Q: While jailbreaking, I am stuck at 60%, now what to do?

A: In this case, use this new version though it is still in beta stage, but it would help you bypass 60% issue.

Q: TaiG jailbreak tool v2.4.1 says Apple driver hasn’t been found, now from where to download this driver?

A: If you launch TaiG 2.4.1, but it gives you an error that Apple drivers are not installed on your device, you can simply go to this Chinese website and download the appropriate drivers for your PC. The page is in Chinese, but you can translate it into English using the Google translator.


Q: Where is the direct download link for TaiG 2.4.1?

A: In order to make it easier for our readers to find the latest version of TaiG, we have published a dedicated article for TaiG where you can find the download links for recently released TaiG versions.

Q: Can I use this new version of TaiG to jailbreak iOS 9 pubic beta?

A: Apple released iOS 9 public beta yesterday. However, TaiG jailbreak is not compatible with iOS 9 yet. If you find any information regarding TaiG iOS 9 jailbreak on any website, it is fake. We will keep you updated when the official version of TaiG for iOS 9 is released.

Q: What are the instructions and precautions to use TaiG?

A: We have already mentioned the complete step by step instructions to use TaiG in our previous post. You can also find the important notes regarding the use of TaiG in that article.

]]> 0 latest version taig taig_2.4.1
How to Get iOS 9 Public Beta Downloaded and Installed on Your iPhone or iPad Fri, 10 Jul 2015 05:07:31 +0000 We have got another good news for those who are anxiously waiting for iOS 9 release. Though Apple has already told us that the final and public build would be released in the coming fall, but the public beta is now available for download.

There is a big difference between public build and public beta. The Public build of iOS or any software means that it is now ready to be rolled out for supported devices. It is made available for general public either through any online website or an updater. Whereas the public beta is an entirely different thing. It is issued to only those users who want to enjoy the new features and also want to help Apple by sending them the feedback and any bug report using the built-in assistant. It can be installed on the pre-registered device only after following few specific steps which are mentioned below.


iOS 9 public beta 1 is available for those iPhone and iPad users who have already signed up for Public beta program. If you didn’t apply for any such program in near past, you could sign up here. After successful signup, you’ll get an email alert whenever new public beta is released, along with the download and installation instructions. Right now the Apple servers are at full throttle and you may face difficulties in signing up or signing in due to the recent release of beta 1.

It is important to mention here that iOS 9 beta 3, which was released only one day ago, is similar to iOS 9 public beta, even having the same build number. If you have a developer account and already running iOS 9 beta 3, you don’t need to install this first beta on your device. There is no difference between these two firmware versions.

Download and Install iOS 9 Public Beta:

Step 1: Go to Apple beta program website and sign in with the registered Apple ID. If you never registered your ID, you can sign up right now and keep following the below steps. Click on “Agree” button when present the agreement in order to download the iPSW file on your device.

Step 2: Now go to on your iPhone or iPad to download and install the profile on your iOS device.


Step 3: After you have installed the profile, you may be asked to restart your phone.


Step 4: Now go to Settings, General and Software Update. iOS 9 Beta 1 download will be ready there for further action.

It would be very unfair if we don’t tell you that this beta is still buggy and it may brick your device while performing the above-mentioned procedure. Moreover, you may also lose your important messages, files, pictures and other content while upgrading from iOS 8 to iOS 9 or downgrading from iOS 9 to iOS 8 version. We recommend you install it on your test phone which is not used regularly. If you want to downgrade iOS 9 to iOS 8 (iOS 8.4), follow our this guide.

]]> 0 iOS_9_public-download download_profile_iOS9 ios_9_update
Direct Download Links for iOS 9 Beta 3 for iPhone, iPad and iPod Touch Wed, 08 Jul 2015 18:45:15 +0000 Here is the new beta release of iOS 9 for the supported iPhone, iPad and iPod Touch devices. The most important change in it is that it contains the full support for Apple Music.

Apple Music was announced earlier this year and was expected to be released with the final release of iOS 9. However, the Cupertino-based company made a smart movement and rolled it out in iOS 8.4. The users who were running iOS 9 had no option but to wait for the new release. Finally iOS 9 beta 3 is loaded with Music App along with Beats 1 radio station. It is to be noted the devices once updated to iOS 9, whether it is beta, could not be downgraded to any variant of iOS 8. That’s why it is recommended not to install any beta OS on your regularly used iPhone, iPad or iPod Touch.


It is expected that this third beta would be the last beta before Apple launches the first public beta. The exact date of first public beta is yet not revealed, but Apple has provided an option where the users with authentic Apple ID and passcode can sign up for the alerts. Apple would send them an email when the download links for public beta are ready. If you want to be an early tester and help Apple fix the issues you find while using the beta builds, you can sign up here.

Apple’s iOS 9 is improved a lot, mainly focusing on proactivity and intelligence. Here are few features you’ll find in the final release in case you missed the previous updates.

  • It allows apps to learn users’ habits and act accordingly.
  • Siri is now smarter.
  • Search is improved
  • Built-in apps revamped.
  • Passbook is now called Wallet.
  • Split-screen multitasking for iPad along with new keyboard layout.
  • Better battery optimization with new low power mode.
  • App thinning which would allow apps to take less space on iOS devices.

For detailed preview, you can visit the official page of iOS 9.

Direct Download links for iOS 9 Beta 3:

Here are the direct download links of iOS 9 beta 3. To download the required iPSW file for your device, click on the link, but there is a catch. These direct links would work only if you an account with Apple Developer Program.

Download links for iOS 9 beta 3 for iPhone:

Download links for iOS 9 beta 3 for iPad:

Download links for iOS 9 beta 3 for iPod touch:

]]> 0 ios_9_direct_links
Download The Latest Version of TaiG to Jailbreak iOS 8 – 8.4 Mon, 06 Jul 2015 12:20:02 +0000 Download the latest version of TaiG jailbreak for your iPhone, iPad and iPod Touch.

As TaiG team is releasing an update of its jailbreak tool now and then, we have decided to write a separate post which will be updated regularly with the download link of the latest version of TaiG. The recently released version is now v2.3.1 which is the newest edition to this series.

Update 1X: TaiG 2.4.1 is now available. Download links are at the bottom of this post.

Update 2X: The Mac Version of TaiG for iOS 8.1.3 – iOS 8.4 is also available for download. The direct download link is at the bottom of this post.

The new version doesn’t contain any new changes or features. Instead, it is incorporated with the new version of Cydia 1.1.20.

download latest taiG

It is to remind you that TaiG supports all major releases of iOS 8. So, if you are running any jailbroken iOS 8 version, you can safely install the recently rolled out iOS 8.4 and then use this latest version of TaiG to re-jailbreak. In case you are already running iOS8.4 jailbroken with any previous version of TaiG, you don’t need to re-jailbreak your device. You can simply launch Cydia, add repo and get the latest update of TaiG on your device.

For novices, here is the step by step guide to jailbreak you device using TaiG.

How to Use TaiG, the Latest Version:

The first and the most important thing to know is that the current version is compatible with Windows Operating system only. There is no Mac version available so far, though the team has shown its intention that Mac users would also be made happy very soon. If you don’t have access to Windows, you can try any of the solutions mentioned in our previous post.

Important Notes:

  • Always back up your device before using any jailbreak.
  • Install the latest version of iTunes on your computer.
  • Try to restore to clean iOS firmware.
  • Disable passcode, TouchID, and Find My iPhone.
  • Turn off antivirus or any firewall temporarily.
  • Alway run TaiG in Administrative mode.

Step 1:

Download the current version of Taig from the download link provided at the bottom of this post.

Step 2:

Run the tool and connect your device with PC.


Step 3:

Uncheck “3K Assistant” option and click on Start button.


Step 4:

Now sit back and wait. Let TaiG complete its work.

Step 5:

Once completed, you’ll get the success message. Now disconnect your device, launch Cydia from the homescreen of your iPhone / iPad and install your favorite tweaks.

Download the Latest TaiG:

Please bookmark and save this page. We will keep updating this post with the latest download links. If you are searching for previous versions of TaiG, here are v2.2.0 and TaiG 2.2.1.

]]> 0 latest version taig taig-tutoria taiG Screenshot of Windows Version
TaiG’s New Version 2.2.1 Released, Includes Security Fixes Thu, 02 Jul 2015 17:28:00 +0000 Here is another update from TaiG team for iOS 8.x – iOS 8.4 jailbreak. The new version 2.2.1 fixes some security flaws, mainly “setreuid” which allows apps to gain root access on the devices.

Update: There is a new version of TaiG available. Though it doesn’t contain any new features, but it does include the new version of Cydia. Get it from our TaiG download page.

Update 2x: TaiG 2.4.1 available for download.

If you didn’t jailbreak your device, you should download this recently released update and try it. If this version doesn’t work for you, you can give a try to the previous version and then install the update from the Cydia store.


How to Install TaiG Version 2.2.1?

There are, in fact, two ways you can use to get this TaiG update on your device. The first way is for those users who are still running the stock iOS 8.4 version and never run any jailbreak like TaiG 2.2.0 or PP jailbreak. The second way is for those who are running any iOS 8.x version jailbroken with the previous version of TaiG.

1. Clean Installation of TaiG:

This method is very simple. All you have to do is to download the latest version of TaiG and run it after connecting the device with the PC. Before you perform this step, it is always recommended to back up your device either with iCloud or iTunes.

The steps are same as we have mentioned in our previous post.

2. Installation of TaiG 2.2.1 on Already Jailbroken Devices:

If the device is already jailbroken with any previous version of TaiG and now you want to get the latest update, you can either re-run this new version on your device or install the update from Cydia store. The latter method is more convenient and simple than the for one.

If you want to install the update from Cydia store, you have to enter repo and then refresh the changes. Soon you’ll see the update from TaiG team under the changes tab. Install the update as you do any other app from Cydia Store.


Download TaiG v2.2.1 [Direct Download Link from Official TaiG Website]

]]> 0 taig-jailbreak-8-4 taig-from-cydia
How to Use TaiG v2.2.0 iOS 8.4 Jailbreak Wed, 01 Jul 2015 04:57:56 +0000 The latest TaiG v2.2.0 is now available for download. It means we can jailbreak the recently rolled out iOS 8.4 firmware on our iPhone 6, iPhone 6 Plus, iPhone 5, 5S, 4S and supported iPad models.

Update: TaiG v2.2.1 is now available with improved stability and security fixes.

Update 2x: The team has released a new version. You can download new TaiG v2.3.1 here.

Update 3x: Here is a new version of TaiG 2.4.1 released today which fixes the issue of stucking at 60%. Download it from our TaiG download page.


Note: PP jailbreak for iOS 8.4 is also available. If you experience any issue and don’t get the success message, you should give a try to PP jailbreak. 

Many were expecting that Apple would patch the exploits used in the previous version of TaiG, but there was no fix included for TaiG, fortunately. The team behind the jailbreak had to make a few changes, and after few hours of testing the final product is now live.

If you have used TaiG to jailbreak iOS 8.1.3 – iOS 8.3, you’d be well familiar of the tool and how it works. All you have to do is to download the tool on your Windows machine, run it, connect the device and press the start button. In case you are new to jailbreak, here are the instructions in short.

What to Do Before Running TaiG v2.2.0 iOS 8.4 Jailbreak:

Here are few precautionary steps you should follow before running this software:

  • This software is compatible with Windows Operating system only at the moment. There is no Mac version available officially. So, if you find any Mac version of TaiG on any website, other than the official one, don’t download it and try it on your OS X machine. If you don’t have access to Windows PC, you should think of using one of the methods mentioned in our previous post to run it on Mac.
  • Always, always back up your device first using the latest version of iTunes. No software is guaranteed to run 100% safely every time. You might lose your precious data during the process.
  • It is recommended to restore the device to clean iOS 8.4 so that the jailbreak process completes smoothly. If you are jailbreaking the device updated by using the built-in updater, you might get some errors.
  • Disable antivirus or firewall before running TaiG.
  • Always run it in the administrative mode.
  • Disable TouchID, Passcode and turn off Find My iPhone features before the process.

TaiG Step by Step Guide:

Step 1:

Download the recent version of TaiG from the link provided at the bottom of this post.

Step 2:

Unzip and run it in Administrative mode.

Step 3:

Connect your device with the PC and uncheck 3K Assistant.


Step 4:

Click the Start button to begin the jailbreak.

Step 5:

Now sit back and wait patiently. Let the software do its work.

Once completed, you’ll get the “Jailbreak Succeeded” message.


Now open Cydia on your device and install your favorite tweaks, apps and themes from the store.

Download TaiG v2.2.0 iOS 8.4 Jailbreak: Link

]]> 0 taig-jailbreak-8-4 taig-tutoria success-taiG Screenshot of Windows Version
Download PP v2 iOS 8.4 Jailbreak with Step by Step Guide Tue, 30 Jun 2015 18:30:42 +0000 Within few hours of iOS 8.4 release, the jailbreak team behind PP jailbreak ( also known as 25PP or PP Assistant) has updated its software to support the new iOS version. If you want to get rid of the restrictions incorporated by Apple in iOS 8.4, simply download PP v2 and run it to install third-party apps from Cydia store.

Update: Now the Mac version of PP jailbreak for iOS 8.4 is also available for download. You don’t have access to Windows PC, you can use the Mac version to jailbreak iPhone, iPad and iPod Touch running on iOS 8.3/iOS 8.4.


The whole jailbreak process is very simple just like TaiG tool. In fact, the team behind TaiG has accused 25PP team of stealing their code and using it in this software. We hope TaiG will also get the update very soon. But if you don’t want to wait for TaiG, you can download iOS 8.4 PP jailbreak right now.

Update: The latest TaiG iOS 8.4 is now Available

Step 1:

First of all update your device to the latest iOS 8.4 version and back it up using iTunes.

Step 2:

Make sure you have the latest version of iTunes installed on your PC. Turn off TouchID, Passcode and Find my iPhone features on your iPhone / iPad.

Step 3:

Download PP jailbreak from the links mentioned below on your desktop and run it in Administrative mode.

Step 4:

Click the button to start the jailbreak process.



PP will under 8 different stages before the process completes. It may stuck at 5/8 stage or at any stage. Don’t panic at this point. Wait and let the software perform its functions.


Step 5:

Once the jailbreak is completed you’ll get the congratulation message on your PC screen.


Download iOS 8.4 PP Jailbreak:

Download PP jailbreak iOS 8.4

In case the above link doesn’t work, or it is giving any error after few attempts, download this version and use it.

Note: Though this jailbreak is safe to use and we have also tested it on one of our devices, but use it at your own risk. We, at Shoutpedia, won’t be responsible for any type of damage. The best advice we give to our readers is to back up your iPhone / iPad first so that you don’t lose any important data while performing any jailbreak process.

Currently, this software is available for Windows users only. Mac version may be released later.

]]> 0 pp-jailbreak-iOS8.4 PPv2 pp-ios-8-4 pp-success